4. OPERATION
1) Open the operation window. (When the model used is the MR-J2S-200CP MR-J2S-350CP or more,
also remove the front cover.)
2) Install the battery in the battery holder.
3) Install the battery connector into CON1 until it clicks.
Operation window
Battery
For MR-J2S-100CP or less
Battery holder
For MR-J2S-500CP MR-J2S-700CP
(6) Parameter setting
Set parameter No.2 (Function selection 1) as indicated below to make the absolute position detection
system valid.
Parameter No.2
1
Battery connector
Battery holder
Battery connector
CON1
Battery
Selection of absolute position detection system
0: Incremental system
1: Absolute position detection system
Battery connector
CON1
Battery
4 - 42
Battery holder
For MR-J2S-200CP MR-J2S-350CP
CON1