Configuring Snmp - Avaya PARTNER 1600 DSL MODULE User Manual

Configuring
SNMP
Avaya, Inc.
To change the password:
1. On the Main Menu, select Configure Login.
The Password Configuration Menu displays.
*******************************************
* Password Configuration Menu
*******************************************
1. Change User ID
2. Change User Password
3. Change NetMan Password
2. Select Change User Password or Change NetMan
Password.
The following message displays.
Enter new Password (up to 17 characters) >
3. Type the new password, and then press ENTER.
4. Retype the new password, and then press ENTER.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect. For more information on
restarting the PARTNER ACS 1600 DSL module, see the
"Getting started" chapter.
You can use the Simple Network Management Protocol
(SNMP) to remotely manage the PARTNER ACS 1600 DSL
module. The PARTNER ACS 1600 DSL module currently
supports the following SNMP options:
Enable/disable SNMP
Configure System Contact
Configure System Name
Configure System Location
Configure SNMP Community
Configure SNMP Trap Host IP Address
For more information on the SNMP options, see the "Main
Menu" chapter.
- 88 - PARTNER ACS 1600 DSL module User Guide
*