Table of Contents
Advertisement
Avaya, Inc.
N. Configure DNS Client
Displays the DNS Client Menu, which contains the following
commands to configure the Domain Name Server (DNS)
client:
A. Set DNS Server IP Address
Sets the IP address of the DNS Server. Type the DNS
Server IP address, and then press ENTER.
T. Set DNS Server Timeout
Sets the DNS Server Timeout, a value between 5 - 20
seconds (default = 5 seconds). Type the DNS Server
Timeout value, and then press ENTER.
S. Display DNS Cache and Statistics
Displays information about the data in the DNS cache.
H. Configure DHCP Client
Enables and disables the Dynamic Host Configuration
Protocol (DHCP) client for the selected Interface. Type the
number of the Interface, the number of the port, and then
enable or disable.
L. Configure DHCP Relay
Displays the DHCP Relay Menu, which contains the following
commands to configure the DHCP Relay:
E. Enable/Disable DHCP Relay
Enables and disables the DHCP Relay.
When you enable the DHCP Relay, you must also
enter a new DHCP server IP address. Type the DHCP
Server IP address, and then press ENTER.
The PARTNER ACS 1600 DSL module displays a
default or last-used value in parentheses to the left of
the command prompt.
ENTER.
C. Configure DHCP Relay
Sets the DHCP server IP address. Type the DHCP
Server IP address, and then press ENTER.
The PARTNER ACS 1600 DSL module displays a
default or last-used value in parentheses to the left of
the command prompt.
ENTER.
- 33 - PARTNER ACS 1600 DSL module User Guide
To accept this value, press
To accept this value, press
Advertisement
Table of Contents
