2. PARTNER ACS 1600 DSL module
Hardware and
software
requirements
Connectors
Avaya, Inc.
This chapter describes the PARTNER ACS 1600 DSL module
hardware and software requirements, as well as the physical
IAD.
You must use a terminal emulation program, such as
HyperTerminal or ProCommPlus, to configure the PARTNER
ACS 1600 DSL module. Once you configure an IP address,
you can also use Telnet to remotely administer the PARTNER
ACS 1600 DSL module.
"Getting started" chapter.
The PARTNER ACS 1600 DSL module contains the following
connectors:
Console cable
Connects the PARTNER ACS 1600 DSL module to a local
PC, using a straight through 9 pin serial (DB9 RS 232) cable.
You can then configure the PARTNER ACS 1600 DSL
module using terminal emulation software.
information on configuring the PARTNER ACS 1600 DSL
module,
see
"PARTNER
configuration" later in this chapter.
Interfaces
Available interfaces include the following:
DSL-SDSL (Symmetrical Digital Subscriber Line) that
supplies voice lines and data connection for the
PARTNER ACS System
LAN - 10/100BaseT Ethernet
Console Port (DB9 Connector [RS232 Serial Interface])
USI - V.35 Interface
- 13 - PARTNER ACS 1600 DSL module User Guide
basics
For more information, see the
ACS
1600
DSL
For more
module