Table of Contents
Advertisement
Avaya, Inc.
Configuring the congestion parameters
To configure the congestion parameters:
1. On the Main Menu, select Configure WAN, and then type
the slot number of the WAN interface that you want to
configure.
The WAN Configuration Menu displays.
2. Select Configure FR Options.
The Frame Relay Options submenu displays.
*****************************************
*
Frame Relay Options
*****************************************
1. Configure Fragmentation
2. Configure Maintenance Protocol
3. Configure Congestion Parameters
3. Select Configure Congestion Parameters.
The FR Congestion Configuration submenu displays.
*****************************************
*
FR Congestion Configuration
*****************************************
1. Configure Transmit Congestion
Parameters
2. Configure Receive Congestion
Parameters
4. Do one of the following.
Select
Parameters,
messages to set:
FECN/BECN condition set size
FECN/BECN condition clear size
FECN/BECN max number of bytes to store
Select
Parameters,
messages to:
FECN/BECN condition set size
FECN/BECN condition clear size
FECN/BECN max number of bytes to store
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect. For more information on
- 123 - PARTNER ACS 1600 DSL module User Guide
Configure
Transmit
and
then
follow
Configure
Receive
and
then
follow
*
*
Congestion
the
on-screen
Congestion
the
on-screen
Advertisement
Table of Contents
