Configuring The Nat Local Server Entry - Avaya PARTNER 1600 DSL MODULE User Manual

Configuring
the NAT local
server entry
Avaya, Inc.
restarting the PARTNER ACS 1600 DSL module, see the
"Getting started" chapter.
When you configure the NAT local server, it allows access
from the Internet via the IP address of the NAT-enabled port.
To configure the NAT local server entry:
1. On the Main Menu, select Configure NAT.
The NAT Configuration Menu displays.
*****************************************
* NAT Configuration Menu
*****************************************
B. Enable/Disable NAT Debug Messages
P. Enable/Disable NAT Translation by Port
T. Configure NAT TCP Timeout
U. Configure NAT UDP Timeout
R. Configure NAT Port Range
N. Configure NAT Local Server Entry
S. Display NAT Statistics
C. Display NAT Connection Table
D. Display NAT Connection Details
O. Display NAT Local Server Table
X. Delete IP Address from NAT Tables
Y. Delete NAT Local Server Entry
2. Select Configure NAT Local Server Entry.
The following instructions display on-screen:
Enter NAT Local Server Entry to Configure
(1..10): (1)
3. Type the local server entry to configure (range = 1-10),
and then press ENTER.
The following instructions display on-screen:
Current NAT Local Server Translated IP
Address = 0.0.0.0
Enter new NAT Local Server Translated IP
address:
- 153 - PARTNER ACS 1600 DSL module User Guide
*