Pick Sound Heard If Insufficient Wan B/W To Complete Call; Configure Tollbridge Voice Client; Set Client Ip Address; Set Voice Gateway Ip Address - Avaya PARTNER 1600 DSL MODULE User Manual

U. Configure
Tollbridge
Voice Client
Avaya, Inc.
Cc Port (16 total)
V. Pick sound heard if insufficient WAN B/W to
complete call
Displays Insufficient
submenu, which contains the following commands:
0. Play Silence
1. Play Fast Beeping
Select your choice.
Displays the Tollbridge Configuration Menu, which contains
the following submenus and commands.
The PARTNER ACS 1600 DSL module displays a default or
last-used value in parentheses to the left of the command
prompt. To accept this value, press ENTER.

0. Set Client IP address

Sets IP address of the client. Type the client IP address, and
then press ENTER.

1. Set Voice Gateway IP Address

Sets the voice gateway IP address. Type the voice gateway
IP address, and then press ENTER.

2. Print Current Configuration

Displays the following information about the Tollbridge voice
client configuration:
Client IP address
Gateway IP address
Priority Voice DLCI (Frame Relay only)
Debug message flags (OFF or ON)
o Status/keep-alive messages
o Provisioning messages
o State-transition messages
- 84 - PARTNER ACS 1600 DSL module User Guide
Bandwidth Indication Setting