Manage Mgcp/Ncs Embedded Client; Configure Mgcp/Ncs Parameters; Display Mgcp/Ncs Statistics; Debug Mgcp/Ncs - Avaya PARTNER 1600 DSL MODULE User Manual

M. Manage
MGCP/NCS
Embedded
Client
Avaya, Inc.
Displays the MGCP/NCS Management Menu, which contains
the following submenus and commands.
C. Configure MGCP/NCS parameters
Sets the MGCP/NCS parameters.
information, and then press ENTER:
Default IP address for Notified Entity
IP address to use for MGCP signaling (Data)
packets
Type of Service (TOS) field value for the IP header
of the outbound signaling packets
IP address to use for RTP Transport (Voice)
packets
TOS field value for the IP header of the outbound
RTP Transport packets
S. Display MGCP/NCS statistics
Displays the Endpoint (line) and connection statistics. If no
calls are active, only whether or not the Endpoint is currently
connected to its Notified Entity displays.
D. Debug MGCP/NCS
Displays the MGCP Debug menu, which contains the
following commands.
1. Disable all msgs
2. Enable Informational msgs
3. Enable Verbose msgs
Select your choice.
R. Remove a connection
Removes LOST connections.
Connection ID to delete, and then press ENTER.
- 79 - PARTNER ACS 1600 DSL module User Guide
Type the following
Type the number of the