Using A Telnet Program - Avaya PARTNER 1600 DSL MODULE User Manual

Avaya, Inc.
8. Configure Login
9. System Utilities
D. Configure DHCP Server
N. Configure NAT
T. Derived Timing
Z. Diagnostics Menu
C. Command Line Interface
P. VoicePath Configure
For more information on the menus, submenus and
commands on the Main Menu, see the "Menu interface"
chapter.

Using a Telnet program

You must set an IP address for the Ethernet port before you
can use a Telnet program to access the PARTNER ACS 1600
DSL module.
Configuring a port IP address
To configure a port IP address:
1. On the Main Menu, select Configure IP Router.
The Router Configuration Menu displays.
*****************************************
* Router Configuration Menu
*****************************************
C. Configure Port IP Address
U. Unconfigure Port IP Address
S. Add/Remove a Static Route
R. Enable/Disable RIP
V. Configure RIP Version by Port
P. Configure RIP Poisoned Reverse by Port
N. Configure DNS Client
H. Configure DHCP Client
L. Configure DHCP Relay
T. Configure Telnet Server Port
F. Configure IP Filtering
D. Display Route Table
- 17 - PARTNER ACS 1600 DSL module User Guide
*