Table of Contents
Advertisement
Avaya, Inc.
6. Set SDSL to AccessLan CPE Mode
7. Set SDSL Speed Manually
8. Restart SDSL Activation Sequence
9. SDSL Interface Mode (Bit Order)
A. Enable/Disable SDSL AutoBaud Debug
Messages
D. Enable/Disable SDSL Debug Messages
Y. Enable/Disable Sync Msgs
P. Preactivation Debug Mode
4. Select your choice.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect. For more information on
restarting the PARTNER ACS 1600 DSL module, see the
"Getting started" chapter.
Configuring the USI interface
To configure the USI interface:
1. On the Main Menu, select Configure WAN.
The following instructions display on-screen:
Available WAN Interfaces:
1. SDSL
3. Universal Serial
0. (Abort)
Enter
slot
configure:
2. Type 3.
The WAN Configuration Menu displays.
*****************************************
*
WAN Configuration Menu
*****************************************
Configuring Universal Serial
1. Configure Datalink Protocol
2. Configure Physical Interface
ESC to return to previous menu
- 104 - PARTNER ACS 1600 DSL module User Guide
number
of
WAN
interface
to
*
Advertisement
Table of Contents
