Dhcp Server Configuration; Enabling Dhcp - Avaya PARTNER 1600 DSL MODULE User Manual

10.
Enabling
DHCP
Avaya, Inc.

DHCP server configuration

This chapter walks you through the steps required to
configure the Dynamic Host Configuration Protocol (DHCP)
server. For more information on the menus, submenus and
commands in this chapter, see the "Menu interface" chapter.
DHCP allows for dynamic allocation of network addresses and
configurations to newly attached hosts. DHCP reduces the
work required to administer a large network.
You must complete the following steps to configure the DHCP
server:
Enable DHCP (factory default = disabled)
Configure the DHCP server parameters
Configure the DHCP address range pool
To enable DHCP:
1. On the Main Menu, select Configure DHCP Server.
The DHCP Server Configuration Menu displays.
*****************************************
* DHCP Server Configuration Menu
*****************************************
E. Enable/Disable DHCP
B. Enable/Disable DHCP Debug Messages
I. Configure DHCP Server Parameters
P. Configure DHCP Address Range Pool
C. Configure DHCP Client Entry
F. Display DHCP Configuration
S. Display DHCP Server Statistics
A. Display DHCP Server Assigned Addresses
U. Display DHCP Server Unassigned
Addresses
D. Display DHCP Entry Details
X. Delete A DHCP Client Entry
- 159 - PARTNER ACS 1600 DSL module User Guide
*