Table of Contents
Advertisement
Avaya, Inc.
Enabling/disabling SNMP
To enable or disable SNMP:
1. On the Main Menu, select Configure SNMP.
The SNMP Configuration Menu displays.
*****************************************
*
SNMP Configuration Menu
*****************************************
E. Enable/Disable SNMP
P. Configure System Contact
N. Configure System Name
L. Configure System Location
C. Configure SNMP Community
T. Configure SNMP Trap Host IP Address
2. Select Enable/Disable SNMP.
3. Do one of the following:
To enable SNMP, type E.
To disable SNMP, type D.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect. For more information on
restarting the PARTNER ACS 1600 DSL module, see the
"Getting started" chapter.
Configuring the System Contact
To configure the system contact:
1. On the Main Menu, select Configure SNMP.
The SNMP Configuration Menu displays.
*****************************************
*
SNMP Configuration Menu
*****************************************
E. Enable/Disable SNMP
P. Configure System Contact
N. Configure System Name
L. Configure System Location
C. Configure SNMP Community
T. Configure SNMP Trap Host IP Address
- 89 - PARTNER ACS 1600 DSL module User Guide
*
*
Advertisement
Table of Contents
