Configuring The First Handset To A Base Station - Avaya 7406 Installation Manual

18 Chapter 1 About Avaya 7406 Digital Mobile Handset
Configuring the Handset ID Number
Each of the three handsets registered to a base station share an identical Security code, but each
handset has a unique Set ID of 1, 2, or 3.
Follow these steps to set the handset ID and new password:
1 Press the Options button.
2 ïï ï ï
Press
3 ï ïï ï
Press
ïï ï ï
4 Press
The display shows the current Handset ID #.
• If this is the correct number, press
• If you want to change the number, follow these steps:
ïï ï ï ïï
a Press
The display shows
b Enter the default password (000000).
ï ï
c Press
The display shows
left of the LCD.
d Press the digit that you want to assign to this handset.
e ï ï
Press
The display shows
Changing the Handset ID Password
After you enter the handset ID, if you want to change the password for the ID access, follow these
steps:
1 ï ïï ï
Press
Note: This password is used to access the Handset ID option. If you decide not to
change the password, press the Option button to exit the menu.
ïï ï ï
2 Press
The display shows
3
Enter the default six-digit password (000000) or the last password you entered.
ï ï
4 Press .
The display shows
5 Enter a new six-digit password.
Note: For ease of administration, it is recommended that you use the same
password as the one you used for the Security code/S.S. Code.
NN40110-300 NN40110-300
.
until the display shows
.
.
ïï ïïïïïï ïïï ïïï
to accept the code.
ïïïïïïïïï ïïïïïï ïï
.
ï ïïï ï ï ï ïïïïïï
until the display shows
.
ïï ïïïïïïï ïïï ï
ïï ïïïïï ïï ïïï ï
ï ïïï ï ï ï ïïïïïï
.
ï ï
and continue with the next section.
. (six digits)
ï
. The current Handset ID # is displayed on the bottom
.
ï ïïïïï ïïï ïïï ïïï .
.
.