Table of Contents
Advertisement
Avaya, Inc.
C. Configure Port IP Address
Sets the IP address and subnet mask for the selected
interface.
Type the number of the Interface, the number of the port or
connection to configure, and then enter the following:
New IP address
New subnet mask
Priority
The PARTNER ACS 1600 DSL module displays a default or
last-used value in parentheses to the left of the command
prompt. To accept this value, press ENTER.
U. Unconfigure Port IP Address
Deletes the IP address of the selected interface. Type the
number of the port to unconfigure, confirm, and then press
ENTER.
S. Add/Remove a Static Route
Displays the Router Modification Menu, which contains the
following commands:
A. Add a Static Route
Creates a static route and adds it to the Route Table.
Type the following information for the route you want to
add, and then press ENTER:
Destination (IP) address
Network mask
Gateway
The PARTNER ACS 1600 DSL module displays a default or
last-used value in parentheses to the left of the command
prompt. To accept this value, press ENTER.
R. Remove a Route
Deletes a static route from the Route Table. Type the
IP address of the route to remove, and then press
ENTER.
F. Add/Change Default Route
Creates or changes the default static route, and then
adds it to the Route Table. Type the Gateway address
for the default route, and then press ENTER.
- 31 - PARTNER ACS 1600 DSL module User Guide
Advertisement
Table of Contents
