Table of Contents
Advertisement
Avaya, Inc.
2. Select Configure System Contact.
The following instructions display on-screen:
System Contact is currently:
Enter new System Contact >
3. Type the name of the SNMP contact person (maximum =
39 alphanumeric characters) or press ENTER to accept
the default value that displays.
The system contact name is not case-sensitive.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect. For more information on
restarting the PARTNER ACS 1600 DSL module, see the
"Getting started" chapter.
Configuring the System Name
To configure the system contact:
1. On the Main Menu, select Configure SNMP.
The SNMP Configuration Menu displays.
*****************************************
*
SNMP Configuration Menu
*****************************************
E. Enable/Disable SNMP
P. Configure System Contact
N. Configure System Name
L. Configure System Location
C. Configure SNMP Community
T. Configure SNMP Trap Host IP Address
2. Select Configure System Name.
The following instructions display on-screen:
System Description is currently:
Enter new System Description >
3. Type the name of the SNMP host server (maximum = 39
alphanumeric characters) or press ENTER to accept the
default value that displays.
The system name is not case-sensitive.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect. For more information on
restarting the PARTNER ACS 1600 DSL module, see the
"Getting started" chapter.
- 90 - PARTNER ACS 1600 DSL module User Guide
*
Advertisement
Table of Contents
