Enabling Nat Translation - Avaya PARTNER 1600 DSL MODULE User Manual

Enabling NAT
translation
Avaya, Inc.
To enable the NAT translation by port:
1. On the Main Menu, select Configure NAT.
The NAT Configuration Menu displays.
*****************************************
* NAT Configuration Menu
*****************************************
B. Enable/Disable NAT Debug Messages
P. Enable/Disable NAT Translation by Port
T. Configure NAT TCP Timeout
U. Configure NAT UDP Timeout
R. Configure NAT Port Range
N. Configure NAT Local Server Entry
S. Display NAT Statistics
C. Display NAT Connection Table
D. Display NAT Connection Details
O. Display NAT Local Server Table
X. Delete IP Address from NAT Tables
Y. Delete NAT Local Server Entry
2. Select Enable/Disable NAT Translation by Port.
The following instructions display on-screen:
Available Interfaces :
1. SDSL
2. 10/100BaseT Ethernet
3. Universal Serial
0. (Abort)
Selection :
Interfaces may or may not display, depending on the IAD
in use.
3. Type the number of the port for which you want to enable
NAT, and then type E.
The NAT Configuration Menu redisplays.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect. For more information on
- 152 - PARTNER ACS 1600 DSL module User Guide
*