Modifying A Pvc - Avaya PARTNER 1600 DSL MODULE User Manual

Avaya, Inc.
6. Select the encapsulation you want to configure.
If you select
Encapsulation) or RFC 2364 (PPPoATM using VC
Muxing), follow the on-screen messages to set the PPP
authorization type. Once complete, continue with step 8.
The ATM Service Category Configuration submenu
displays.
*****************************************
* ATM Service Category Configuration
*****************************************
1. CBR
2. UBR
7. Do one of the following:
Select CBR for high priority data.
Select UBR for low priority data.
Follow the on-screen messages to set the Peak Cell Rate
(PCR) value.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect. For more information on
restarting the PARTNER ACS 1600 DSL module, see the
"Getting started" chapter.

Modifying a PVC

To modify a PVC
1. On the Main Menu, select Configure WAN, and then type
the slot number of the WAN interface that you want to
configure.
The WAN Configuration Menu displays.
2. Select Configure PVCs.
The ATM PVC Config Menu displays.
*****************************************
*
*****************************************
1. Add New PVC
2. Modify Existing PVC
3. Delete PVC
4. Show Current PVCs
3. Select Modify Existing PVC.
4. Type the port number to modify, and then press ENTER.
5. Type a VPI between 0-255 (default = 0), and then press
ENTER.
- 110 - PARTNER ACS 1600 DSL module User Guide
RFC 2364 (PPPoATM
ATM PVC Config Menu
with LLC
*
*