Related Manuals for Avaya KEM
Summary of Contents for Avaya KEM
- Page 1 Avaya IP Deskphone Key Expansion Module User Guide Avaya Communication Server 1000 Document Status: Standard Document Version: 04.01 Part Code: NN43119-102 Date: November 2010...
- Page 2 Marks without the express written permission of Avaya or the applicable third party. Avaya is a registered trademark of Avaya Inc.
-
Page 3: Table Of Contents
Setup and assembly ....... 10 Installing the KEM ........11 Using the wall-mount option . - Page 4 Contents...
-
Page 5: Revision History
Revision history Revision history November 2010 Standard 04.01. This document is up-issued to support Avaya rebranding changes. June 2010 Standard 03.01. This document is up-issued to support Avaya Communication Server 1000 Release 7.0. August 2005 Standard 2.00. This document is up-issued to support Nortel Networks Communication Server 1000 Release 4.5. - Page 6 Revision history...
-
Page 7: About The Key Expansion Module (Kem)
About the Key Expansion Module (KEM) This document describes the Avaya IP Deskphone Key Expansion Module (KEM) and how to use it with the IP Phone 2002 and IP Phone 2004. Description The IP Deskphone KEM is a hardware component that connects to the IP Phone 2002 and IP Phone 2004 and provides additional line appearances and feature keys. -
Page 8: Features
IP Phone 2004 can have up to 48 additional logical line/feature keys. • A desk-mount bracket and structural baseplate connect the IP Deskphone KEM to an IP Phone 2002 or IP Phone 2004, or to another IP Deskphone KEM. •... -
Page 9: Adjusting The Display
About the Key Expansion Module (KEM) Adjusting the display The IP Deskphone KEM (see Figure 1 on page 8) has 1 LCD between 2 rows of 12 line/feature keys for a total of 24 keys. Each key has a 10-character display label that is set automatically. Use the controls on the IP Phone to edit the label. -
Page 10: Setup And Assembly
Setup and assembly Setup and assembly The IP Deskphone KEM mounts on the right side of an IP Phone 2002 or IP Phone 2004 as shown in Figure 2. Secure the KEM by snapping it into a receptacle on the back of the IP Phone using the desk-mount bracket and structural baseplate supplied with the IP Deskphone KEM. -
Page 11: Installing The Kem
Note: For the IP Phone 2004, you can optionally adjust the stand angle to maximum, instead of removing the stand. 2. Place the connecting arm of the IP Deskphone KEM behind the IP Phone and align the IP Deskphone KEM connection plug to the AEM port on the back of the IP Phone. -
Page 12: Using The Wall-Mount Option
Adjusting the tilt base The tilt base for the IP Phone 2002 cannot be adjusted; however, the tilt base on the IP Deskphone KEM can be adjusted to match the fixed angle of the IP Phone 2002. The IP Phone 2004 has an adjustable tilt base. Adjust the tilt of both the... -
Page 13: Initializing The Kem
Initializing the KEM Initializing the KEM Once the IP Deskphone KEM has been installed and powered up on your IP Phone 2002 or 2004, the IP Deskphone KEM initializes. When this occurs, the IP Deskphone KEM display lights up and flashes until it establishes communication with the IP Phone. -
Page 14: Controls And Settings
Controls and settings Controls and settings When an IP Deskphone KEM is installed on an IP Phone 2002 or IP Phone 2004, the controls and settings of the IP Phone control both the IP Phone and the IP Deskphone KEM. Use the... -
Page 15: Terms You Should Know
User-defined Feature Key Labels The six keys located at the sides of the upper area of the display on the IP Phone. On the IP Deskphone KEM, the Feature Key Labels display in the LCD in the middle of the IP Deskphone... - Page 16 Terms you should know...
-
Page 17: Index
Wall-mount option 12 Initialize the IP Deskphone KEM Install the IP Deskphone KEM 10 IP Deskphone controls 7, 9 IP Deskphone KEM 7, 10, 13, 15 IP Deskphone KEM controls and settings 14 IP Deskphone KEM description 7 IP Deskphone KEM display 9, 13... - Page 18 Index...