Table of Contents
Advertisement
The Spanning Tree algorithm selects the bridge with the
lowest priority on the network as the Root Bridge.
Q. Configure Spanning Tree Port Priority
Sets the Spanning Tree priority by port, a value between 0-
255 (default = 128).
The lower the value, the higher the
priority.
Type the number of the Interface to configure, the port priority
value, and then press ENTER.
The PARTNER ACS 1600 DSL module displays a default or
last-used value in parentheses to the left of the command
prompt. To accept this value, press ENTER.
The spanning tree algorithm uses the spanning tree bridge
priority to determine which bridge to use as the Ethernet LAN
destination when two or more bridges are bridging between
the same LAN.
H. Configure Spanning Tree Hello Time
Sets the Spanning Tree hello time, a value between 1-10
seconds (default = 2 seconds). Type the hello time value, and
then press ENTER.
The PARTNER ACS 1600 DSL module displays a default or
last-used value in parentheses to the left of the command
prompt. To accept this value, press ENTER.
S. Configure Spanning Tree Max Age
Sets the Spanning Tree max age, a value between 6-40
seconds (default = 20 seconds). Type the max age value,
and then press ENTER.
The PARTNER ACS 1600 DSL module displays a default or
last-used value in parentheses to the left of the command
prompt. To accept this value, press ENTER.
F. Configure Spanning Tree Forward Delay
Sets the Spanning Tree forward delay, a value between 4-30
seconds (default = 15 seconds).
Type the forward delay
value, and then press ENTER.
The PARTNER ACS 1600 DSL module displays a default or
last-used value in parentheses to the left of the command
prompt. To accept this value, press ENTER.
C. Configure Spanning Tree Path Cost
Sets the Spanning Tree path cost, a value between 1- 65,535
(default = 32,768).
Type the number of the Interface to configure, type the path
cost value, and then press ENTER.
Avaya, Inc.
- 42 - PARTNER ACS 1600 DSL module User Guide
Advertisement
Table of Contents
