Configuring The Dhcp Address Range Pool - Avaya PARTNER 1600 DSL MODULE User Manual

Configuring
the DHCP
address range
pool
Avaya, Inc.
You must configure the DHCP address range pool to set the
range of IP addresses to return to the DHCP clients.
To configure the DHCP address range pool:
1. On the Main Menu, select Configure DHCP Server.
The DHCP Server Configuration Menu displays.
*****************************************
* DHCP Server Configuration Menu
*****************************************
E. Enable/Disable DHCP
B. Enable/Disable DHCP Debug Messages
I. Configure DHCP Server Parameters
P. Configure DHCP Address Range Pool
C. Configure DHCP Client Entry
F. Display DHCP Configuration
S. Display DHCP Server Statistics
A. Display DHCP Server Assigned Addresses
U. Display DHCP Server Unassigned
Addresses
D. Display DHCP Entry Details
X. Delete A DHCP Client Entry
Y. Delete A DHCP Assignment Entry
2. Select Configure DHCP Address Range Pool.
The following instructions display on-screen:
Current High IP address of range pool =
0.0.0.0
Enter new High IP address:
3. Type the new high IP address, and then press ENTER.
The following instructions display on-screen:
Current Low IP address of range pool =
0.0.0.0
Enter new Low IP address:
- 163 - PARTNER ACS 1600 DSL module User Guide
*