Table of Contents
Advertisement
Avaya, Inc.
4. Type E.
The Router Configuration Menu redisplays.
5. Repeat steps 1-3 for each port for which you want to
enable RIP poisoned reverse.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect. For more information on
restarting the PARTNER ACS 1600 DSL module, see the
"Getting started" chapter.
Setting the RIP version
To set the RIP version:
1. On the Main Menu, select Configure IP Router.
The Router Configuration Menu displays.
*****************************************
*
Router Configuration Menu
*****************************************
C. Configure Port IP Address
U. Unconfigure Port IP Address
S. Add/Remove a Static Route
R. Enable/Disable RIP
V. Configure RIP Version by Port
P. Configure RIP Poisoned Reverse by Port
N. Configure DNS Client
H. Configure DHCP Client
L. Configure DHCP Relay
T. Configure Telnet Server Port
F. Configure IP Filtering
D. Display Route Table
2. Select Configure RIP Version by Port.
The following instructions display on-screen:
Available Interfaces :
1. SDSL
2. 10/100BaseT Ethernet
3. Universal Serial
0. (Abort)
Selection :
Interfaces may or may not display, depending on the IAD
in use.
- 133 - PARTNER ACS 1600 DSL module User Guide
*
Advertisement
Table of Contents
