Table of Contents
Advertisement
Avaya, Inc.
Configuring the SDSL Interface
To configure the SDSL interface:
1. On the Main Menu, select Configure WAN.
The following instructions display on-screen:
Available WAN Interfaces:
1. SDSL
3. Universal Serial
0. (Abort)
Enter
slot
configure:
2. Type 1.
The WAN Configuration Menu displays.
*****************************************
*
WAN Configuration Menu
*****************************************
Configuring SDSL
0. Quick Configuration
1. Configure Datalink Protocol
2. Configure Physical Interface
3. Select Configure Physical Interface.
The SDSL Configuration submenu displays.
*******************************************
*
*******************************************
Current SDSL configuration:
CPE, AUTO Cycle, Bit Order: Sign.Mag,
SPEED = 1152 Kbps, Conexant AutoBaud:
Disabled
1. Toggle SDSL Mode (CO or CPE)
2. Set SDSL Speed to Auto Cycle (Nokia)
3. Set SDSL Speed to Auto Sense (Copper
Mountain)
4. Enable/Disable Conexant AutoBaud Mode
5. Set SDSL Sync Delay (Lucent)
- 103 - PARTNER ACS 1600 DSL module User Guide
number
of
WAN
SDSL Configuration
interface
to
*
*
Advertisement
Table of Contents
