Disabling Stp; Disabling Stp Globally - Avaya PARTNER 1600 DSL MODULE User Manual

Disabling STP

Avaya, Inc.
2. Select Enable/Disable Bridging by Port.
The following instructions display on-screen:
Available Interfaces :
1. SDSL
2. 10/100BaseT Ethernet
3. Universal Serial
0. (Abort)
Selection :
Interfaces may or may not display, depending on the IAD
in use.
3. Type the number of the port for which you want to disable
bridging, and then type D.
4. Repeat steps 1-3 for each port on which you want to
disable bridging.
The Bridge Configuration Menu redisplays.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect. For more information on
restarting the PARTNER ACS 1600 DSL module, see the
"Getting started" chapter.
To configure the PARTNER ACS 1600 DSL module as a
router, you must disable STP both globally and by port. The
order in which you perform the procedures is irrelevant.

Disabling STP globally

To disable STP globally:
1. On the Main Menu, select Configure Bridge.
The Bridge Configuration Menu displays.
*****************************************
* Bridge Configuration Menu
*****************************************
G. Enable/Disable Bridging Globally
P. Enable/Disable Bridging by Port
A. Configure Bridge Aging Timer
T. Enable/Disable Spanning Tree Globally
O. Enable/Disable Spanning Tree by Port
- 139 - PARTNER ACS 1600 DSL module User Guide
*