Table of Contents
Advertisement
Avaya, Inc.
Configuring Payload Scrambling
You must enable payload scrambling (default = disabled) for
the PARTNER ACS 1600 DSL module to "talk" to a DSLAM
that uses payload scrambling.
To enable payload scrambling:
1. On the Main Menu, select Configure WAN, and then type
the slot number of the WAN interface that you want to
configure.
The WAN Configuration Menu displays.
2. Select Configure ATM Options.
The ATM Configuration Menu displays.
*****************************************
*
ATM Configuration Menu
*****************************************
1. Configure Payload Scrambling
2. Configure F4 OAM VPI
3. Configure F4 OAM Type
4. Display F4 OAM Configuration
5. Send OAM Loopback
6. Configure EmptyCells
3. Select Configure Payload Scrambling, and then do one
of the following:
To enable payload scrambling, type E.
To disable payload scrambling, type D.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect. For more information on
restarting the PARTNER ACS 1600 DSL module, see the
"Getting started" chapter.
Configuring the F4 OAM Cell
To configure the F4 OAM Cell
1. On the Main Menu, select Configure WAN, and then type
the slot number of the WAN interface that you want to
configure.
The WAN Configuration Menu displays.
- 113 - PARTNER ACS 1600 DSL module User Guide
*
Advertisement
Table of Contents
