Setting The Slic Control Mode; Configuring Echo Cancellation - Avaya PARTNER 1600 DSL MODULE User Manual

Avaya, Inc.

Setting the SLIC Control Mode

To set the SLIC control mode:
1. On the Main Menu, select VoicePath Configure.
The Voice Configuration submenu displays.
*****************************************
* Voice Configuration
*****************************************
V. Set Voice Gateway
J. Set Jitter Delay
D. Display Jitter Delay
T. Set SLIC Control Mode
U. Set Compander Mode (u-Law, A-Law)
M. Set Debug Mode
E. Configure Echo Cancellation Default
Settings
2. Select Select SLIC Control Mode.
The SLIC Control Mode Selection submenu displays.
*****************************************
* SLIC Control Mode Selection
*****************************************
Current Control Mode = MANUAL Control
Mode
A. AUTO Control Mode
M. MANUAL Control Mode
3. Select your choice.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect. For more information on
restarting the PARTNER ACS 1600 DSL module, see the
"Getting started" chapter.

Configuring Echo Cancellation

When you enable echo cancellation, it isolates and filters
unwanted digital signals caused by echoes from the main
transmitted signal.
Echo cancellation automatically disables when the PARTNER
ACS 1600 DSL module detects a FAX or modem signal. At
- 125 - PARTNER ACS 1600 DSL module User Guide
*
*