C. Command
Line Interface
Avaya, Inc.
For future implementation.
Displays the command line interface, which supports the
following syntax and commands.
Command line syntax
The command syntax is:
COMMAND <required parameters> (optional parameters)
For example:
Set wan ip address 192.3.4.5 255.255.255.0 2 0 0 1
The
required
<192.3.4.5> and the netmask <255.255.255.0>.
The optional parameters are the slot (2), interface(0),
port(0) and connection(2).
The command and its parameters are NOT case sensitive.
Commands
The following are the commands that are currently supported:
exit – quits the command line interface and returns to
the menu system.
quit – quits the command line interface and returns to
the menu system.
set
ip
<IPGatewayAddress> - sets a static IP route.
set ip default route <DefautltIPaddress> - sets the
default IP address.
set wan ip address <IPaddress> <netmask> (slot)
(interface) (port) (connection) – sets the WAN IP
address. If you do not enter any optional parameters, it
finds the first available slot, interface, port and
connection.
set lan ip address <IPaddress> <netmask> (slot)
(interface) (port) (connection) – sets the LAN IP
address. If you do not enter any optional parameters, it
finds the first available slot, interface, port and
connection.
set wan datalink <framerelay or atm> (slot)
(interface) (port) – sets the datalink protocol to Frame
Relay or ATM. .
parameters, it finds the first available slot, interface and
port.
set wan framerelay dlci <dlci number> <1490 or
1483> (slot) (interface) (port) – sets the Frame Relay
- 75 - PARTNER ACS 1600 DSL module User Guide
parameters
are
route
<IPRoute>
If you do not enter any optional
the
ip
address
<netmask>