Avaya PARTNER 1600 DSL MODULE User Manual page 37

Avaya, Inc.
A. Append a new or buffered filter to the end of the
list
Adds a new filter of the type set with the Toggle input
or output type filters to view/edit command to the
end of list that displays when you select Display all
filters of the chosen type.
Type Y, and then follow the on-screen messages to
enter the following information:
Filter state – Idle or Active
Filter action – Pass or Discard
Filter protocol – IP, ICMP, IGMP, TCP, UDP
Filter Source IP Low Address
Filter Source IP High Address
Filter Source Port Low
Filter Source Port High
Filter Destination IP Low Address
Filter Destination IP High Address
Filter Destination Port Low
Filter Destination Port High
The PARTNER ACS 1600 DSL module displays a
default or last-used value in parentheses to the left of
the command prompt.
ENTER.
E. Edit filter of the chosen type
Displays all filters of the type that you set with the
Toggle input or output type filters to view/edit
command that you can edit.
Type the number of the filter to edit, and then follow the
on-screen messages to enter the following information:
Filter state – Idle or Active
Filter action – Pass or Discard
Filter protocol – IP, ICMP, IGMP, TCP, UDP
Filter Source IP Low Address
Filter Source IP High Address
Filter Source Port Low – TCP or UDP packets
only
Filter Source Port High - TCP or UDP packets
only
Filter Destination IP Low Address
Filter Destination IP High Address
Filter Destination Port Low
- 36 - PARTNER ACS 1600 DSL module User Guide
To accept this value, press