Maintenance - Avaya PARTNER 1600 DSL MODULE User Manual

Maintenance

Avaya, Inc.
To test the PARTNER ACS 1600 DSL module:
1. Verify the WAN link status.
2. Pick up the telephone receiver on the PARTNER phone
and check for a dial tone
If no dial tone is present, troubleshoot as necessary.
3. Repeat steps 2-3 for each provisioned line.
4. Disconnect the telephone once you are through testing the
analog telephone ports.
5. Use a crossover cable to connect the PC to the Ethernet
LAN port on the PARTNER ACS 1600 DSL module.
6. Ping a known good address on the PARTNER ACS 1600
DSL module, and then wait for acknowledgement.
If a timeout occurs, troubleshoot the LAN path to the
PARTNER ACS 1600 DSL module as necessary.
7. Ping a known good address on the network, and then wait
for acknowledgement.
If a timeout occurs, troubleshoot the LAN path to the
PARTNER ACS 1600 DSL module as necessary.
8. Disconnect the PC from the Ethernet LAN port.
9. Use a straight-through cable to connect the Ethernet LAN
port to your local LAN patch panel or hub.
10. Connect the PARTNER ACS 1600 DSL module telephone
ports to the local distribution frame or patch panel.
The PARTNER ACS 1600 DSL module is ready for service.
The PARTNER ACS 1600 DSL module Menu interface
contains built-in utilities for maintenance and development.
Before running the System Utilities, contact your local
Authorized Dealer or call the Avaya Help Line at (800) 628
2888. Consultation charges may apply.
- 166 - PARTNER ACS 1600 DSL module User Guide