Deleting A Dlci - Avaya PARTNER 1600 DSL MODULE User Manual

Avaya, Inc.
6. Select the encapsulation method to use.
The FR DLCI Options submenu displays.
*****************************************
*
*****************************************
1. Configure Transmit CIR
2. Configure Receive CIR
3. Configure FRF.12 Fragmentation
7. Do one of the following:
Select Configure Transmit CIR or Configure
Receive CIR, and then follow the on-screen
messages to set:
Committed burst size (Bc)
Circuit throughput
Excess burst size (Be)
Select Configure FRF .12 Fragmentation, and
then follow the on-screen messages to:
Enable/Disable End-to-End FRF .12
Set Fragment Size
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect. For more information on
restarting the PARTNER ACS 1600 DSL module, see the
"Getting started" chapter.

Deleting a DLCI

To delete a DLCI:
1. On the Main Menu, select Configure WAN, and then type
the slot number of the WAN interface that you want to
configure.
The WAN Configuration Menu displays.
2. Select Configure DLCIs.
The FR DLCI Config Menu displays.
*****************************************
* FR DLCI Config Menu
*****************************************
1. Add New DLCI
2. Modify Existing DLCI
3. Delete DLCI
- 119 - PARTNER ACS 1600 DSL module User Guide
FR DLCI Options *
*