Configuring Frame Relay Dlcis; Adding A Dlci - Avaya PARTNER 1600 DSL MODULE User Manual

Configuring
Frame Relay
DLCIs
Avaya, Inc.
Enter 1 for IDLE cells or 2 for UNASSIGNED
cells:
4. Select your choice.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect. For more information on
restarting the PARTNER ACS 1600 DSL module, see the
"Getting started" chapter.
The PARTNER ACS 1600 DSL module contains commands
that allow you to configure Frame Relay DLCIs:
Add New DLCI
Modify Existing DLCI
Delete DLCI
Show Current DLCIs
You can configure up to 24 DLCIs on the PARTNER ACS
1600 DSL module.

Adding a DLCI

To add a DLCI:
1. On the Main Menu, select Configure WAN, and then type
the slot number of the WAN interface that you want to
configure.
The WAN Configuration Menu displays.
2. Select Configure DLCIs.
The FR DLCI Config Menu displays.
*****************************************
* FR DLCI Config Menu
*****************************************
1. Add New DLCI
2. Modify Existing DLCI
3. Delete DLCI
4. Show Current DLCIs
3. Select Add New DLCI.
- 116 - PARTNER ACS 1600 DSL module User Guide
*