Configuring The Maintenance Protocol - Avaya PARTNER 1600 DSL MODULE User Manual

Avaya, Inc.

Configuring the maintenance protocol

To configure the maintenance protocol:
1. On the Main Menu, select Configure WAN, and then type
the slot number of the WAN interface that you want to
configure.
The WAN Configuration Menu displays.
2. Select Configure FR Options.
The Frame Relay Options submenu displays.
*****************************************
* Frame Relay Options
*****************************************
1. Configure Fragmentation
2. Configure Maintenance Protocol
3. Configure Congestion Parameters
3. Select Configure Maintenance Protocol.
The Frame Relay Maintenance Protocol submenu
displays.
*****************************************
* Frame Relay Maintenance Protocol
*****************************************
0. None
1. CCITT Q.933 Annex A Network
2. CCITT Q.933 Annex A User
3. CCITT Q.933 Annex A Both
4. ANSI T1.617 Annex D Network
5. ANSI T1.617 Annex D User
6. ANSI T1.617 Annex D Both
7. LMI Network (FRF.1.1)
8. LMI User
9. LMI Both
4. Type the number that corresponds to the protocol on your
network, and then press ENTER.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect. For more information on
restarting the PARTNER ACS 1600 DSL module, see the
"Getting started" chapter.
- 122 - PARTNER ACS 1600 DSL module User Guide
(FRF.1.1)
(FRF.1.1)
*
*