Configuring The Nat Timeouts - Avaya PARTNER 1600 DSL MODULE User Manual

Configuring
the NAT
timeouts
Avaya, Inc.
4. Type the new translated IP address (range = 1-65535),
and then press ENTER.
The following instructions display on-screen:
Current NAT
Address = 0.0.0.0
Enter new NAT
address:
5. Type the new standard IP address (range = 1-65535), and
then press ENTER.
The following instructions display on-screen:
Enter NAT
2=UDP):
6. Select the local server protocol, and then press any key.
The NAT Configuration Menu displays.
You must restart the PARTNER ACS 1600 DSL module
for any changes to take effect. For more information on
restarting the PARTNER ACS 1600 DSL module, see the
"Getting started" chapter.
Under normal circumstances, the timeout default setting is
adequate. However, if you interact with multiple-player IP
games or video conferencing, you need to configure the
timeout.
The local server protocol that you select determines which
timeout to configure. TDP and UDP are similar, except that
TCP tracks TCP clients on a per-connection basis and
removes them from the table as soon as the connection
closes.
- 154 - PARTNER ACS 1600 DSL module User Guide
Local Server
Local Server
Local Server
Translated IP
Standard IP
Protocol (1=TCP