Error Messages - Neoware c50 - Thin Client User Manual

7. In the New Connection dialog box, select the host to connect to in the Connect
To list box.
8. Click the Connect button. TeemTalk will attempt to connect to the host. If this is
unsuccessful it will display an error message (see below). All the information
entered in the SSL Connection dialog box is stored in the .nv file on a per session
basis. If the user selects the Save Password option then the Client Certificate
password will be stored in an encrypted form.

Error Messages

Could not connect TCP/IP socket.
The most likely causes of this error are that the service is not running on the server
or the port number is incorrect.
Could not connect SSL socket. Please check that your client certificate is correct.
This message is returned if the server refuses the SSL connection. The most likely
causes are that the server is expecting a client certificate but none has been
specified or the client certificate specified is invalid for some reason. This error
may also be seen if the server is running an incompatible version of SSL.
TeemTalk currently supports SSL2, SSL3 and TLS.
The server's certificate cannot be verified.
The server's identity certificate was not signed by any of the root certificates
installed in TeemTalk. TeemTalk will not connect to a host it cannot verify.
Common name does not match host name.
The common name is part of the server's certificate. SSL assumes this will match
the host name given in the Connect To box in the New Connection dialog box. If
they do not match TeemTalk will not connect to the host.
Setup Menus
8-23