Serial Connection - Neoware c50 - Thin Client User Manual

Getting Started
Clicking the Configure or Telnet Options buttons will display additional options
which are described in the sections Telnet Options, SSL Connection Settings and SSH
Connection Settings in the Setup Menus chapter.
A list of hosts currently available for connection will be displayed in the Connect To
box on UNIX based systems. To make a connection, either click on the name in the list
or type it in, then click Connect.
To save the settings so that they will be automatically reasserted when TeemTalk is
subsequently reset or loaded, display the File menu and select the Save Settings
option.
Note that you can use resources or command line options to initiate a telnet session,
specify the telnet port number, and force TeemTalk to exit when the connection closes.
Refer to the Resources & Command Line Options chapter for details.

Serial Connection

To configure TeemTalk for a serial host connection, display the Settings menu and
select the Serial... option.
The setting of the Use Serial Port option determines whether TeemTalk will commu-
nicate with the operating system shell or a host via an RS232 port. Select the option if
you wish to use the serial port. Host communications will be made via the RS232 port
device specified in the Serial Port box. For example:
If an invalid device is specified, or the device cannot be accessed, communication will
be defaulted back to the operating system shell.
When TeemTalk is communicating with the operating system shell, the Parity setting
is used to specify the number of data bits. Selecting one of the 8 bit settings will
prevent the 8th bit from being stripped, while a 7 bit setting will strip the 8th bit. The
3-4
Sun: /dev/ttya
HP: /dev/tty0
VAX: TTA0: