File Transfer
YMODEM Batch
YMODEM Batch is similar to XMODEM-1K but enables several files to be trans-
ferred. It checks for errors using a cycling redundancy check only.
ZMODEM
ZMODEM is an advanced development of YMODEM which enables much faster
multiple file transfer with enhanced error detection and aborted transfer resumption.
The zmodemStartup resource or -zm command line option can be used to make
TeemTalk check incoming data for a remote ZMODEM startup sequence then
automatically start a file transfer.
Note: XMODEM, YMODEM Batch and ZMODEM require a
IXF
The IXF (Information eXchange Faclility) file transfer protocol is supported when
TeemTalk is running the Tandem 6530 terminal emulation.
22-2
communication setting of 8 data bits, 1 stop bit and no
parity. These settings will automatically be used for the
transfer, after which the original settings will be reasserted.