Key Reference Numbers; Terms & Conventions; Virtual Keysyms; Virtual Key Names - Neoware c50 - Thin Client User Manual

Appendix A: Key Reference Numbers
Lists the reference numbers assigned to keys on the British
keyboard.
Appendix B: Keysyms
Describes the use of virtual keysyms and lists all the valid
keysyms that may be used to define the function of keys.
Appendix C: Virtual Key Names
Lists all the virtual key names that enable you to include a
specific key function in a user definition for key macros, soft
buttons, hotspots, etc.
Appendix D: Product Specification
Describes the level of support provided by each terminal
emulation.
Terms & Conventions
This User's Guide uses the following terms and conventions.
1. Some sections of this User's Guide assume your version of TeemTalk includes the
graphics emulations when describing various procedures and commands. Refer-
ences to 340 (for graphics versions of TeemTalk) in filenames and command
descriptions should be substituted with 320 if you are using a version without the
graphics emulations, unless indicated otherwise.
2. When referring to mouse buttons, it will be assumed that the Left button is
configured as button 1, the Middle button is configured as button 2, and the
Right button is configured as button 3.
3. 'Click' means quickly press then release the specified mouse button.
4. 'Double click' means quickly press then release the specified mouse button twice in
quick succession.
5. 'Drag the pointer' means hold down the left mouse button (or button assigned with
the select function) and slide the mouse so that a selection box is displayed.
6. When references to keys are shown linked by a + (plus sign), this means that two
or more keys have to be pressed at the same time. For example, 'press Ctrl + M'
means press and hold down the Ctrl key, press the M key then release both keys.
Introduction
1-5