The Status Bar - Neoware c50 - Thin Client User Manual

DEC VT Emulations

The Status Bar

A status line can be displayed on the last line in the window when running any of the
DEC VT terminal emulations. An indicator status line is displayed by default on the
25th line the first time you load TeemTalk.
You may choose not to display a status line, or enable a host-writable status line to be
displayed instead. The type of DEC status line displayed is determined by the setting
of the Status Line option in the VT/ANSI/ SCO Settings dialog box. (Refer to the
Setup Menus chapter for details.)
The indicator status line consists of six buttons which show the status of various
operations and enable you to make selections. Some buttons can be clicked using the
mouse pointer to change their state.
1
Button 1: This button displays the active session (always 1), the current page
number (always 1), and the line,column location of the text cursor, or
horizontal,vertical pixel coordinate location of the ReGIS graphics
cursor.
Clicking the button will activate the Hold Screen function, stopping data
from scrolling in the window. To resume scrolling, click the button again.
Button 2: This button toggles the visibility of the soft buttons displayed at the
bottom of the window on and off.
Button 3: This button indicates whether Overstrike Mode or Insert Mode is
currently selected.
In Overstrike Mode (default), new characters will replace already
existing characters at the cursor position. When Insert Mode is selected,
new characters will be inserted at the cursor position without deleting
existing characters, which will move to the right.
Button 4: Indicates the current DEC VT alpha terminal emulation (VT52, VT100,
VT400 7-Bit or 8-Bit). Clicking the button enables you to select a
different DEC VT alpha terminal emulation mode without having to
display the Emulation Settings dialog box, which will be updated
automatically with the new setting.
Button 5: Indicates whether you are Online to the host or in Local mode. Clicking
the button will toggle between the two modes.
Button 6: Indicates the status of the printer as follows:
None signifies that the printer is not turned on or not connected.
9-8
2 3 4 5 6