Ta6530 Settings - Neoware c50 - Thin Client User Manual

TA6530 Settings

This dialog box is displayed by selecting TA 6530 in the Settings menu.
Power On Mode
Factory default: Conversational
This option determines the operating mode that is in effect when the TA6530
emulation is entered after loading TeemTalk.
Note: Changing the current setting will not take effect until you re-
load TeemTalk, so you will need to save the new setting
before exiting TeemTalk.
Conversational and Block modes are normally used for applications running on a
NonStop host system, and ANSI mode for applications running on an LXN host
system. Save the new setting before exiting TeemTalk by selecting Save Settings in
the File menu.
Packet Block
Factory default: Off
This option specifies whether you want to use packet blocking for X.25 communica-
tions line support, and if so, the size of the packet block. The size may be set to any of
Setup Menus
8-53