Serial Settings; Flow Protocol - Neoware c50 - Thin Client User Manual

Serial Settings

This dialog box is displayed by selecting Serial in the Settings menu.
Baud Rate
Factory default: 9600
This option specifies the transmit and receive baud rates for the port selected for host
communications.
Stop Bits
Factory default: 1
This option specifies the number of stop bits sent for each transmitted character.
Parity
Factory default: 8 None
This option specifies the number of data bits and the parity mode for each transmitted
character.

Flow Protocol

Factory default: In/Out
This option specifies the type of flow control used by the line port to communicate
readiness to transmit or receive data from the host.
None
Input
Output - Xon/Xoff on transmitted data
In/Out
- No flow control
- Xon/Xoff on received data
- Xon/Xoff on transmitted and received data
Setup Menus
8-35