Emulation Settings - Neoware c50 - Thin Client User Manual

Setup Menus

Emulation Settings

This dialog box is displayed by selecting Emulation in the Settings menu.
Alpha Emulation
Factory default: VT320-7
The setting of this option determines the current alpha emulation mode.
The ADDS A2 emulation provides compatibility with software designed to drive the
ADDS Viewpoint A2 terminal, as emulated by the Wyse WY-50/50+/60 terminals.
Refer to the Wyse Emulations chapter for more details.
The AIXTerm emulation provides compatibility with software designed to drive an X
terminal using X Windows.
The ANSI emulation is a derivative of the ANSI device driver ANSI.SYS supplied
with all DOS based PCs and which provides the screen management for the DOS
console screen. PC based UNIX systems and Bulletin Board Systems (BBS) often rely
on the ANSI emulation when being accessed by a PC. In ANSI-BBS mode the screen
size is adjusted to 25 lines and the Preferred Font is automatically set to ANSI-BBS.
The setting of the ANSI Codepage option in this dialog box determines the characters
available in the ANSI BBS set. Refer to the Setup Menus chapter for details.
The AT 386 emulation provides compatibility with software designed to drive the
AT&T AT 386 terminal.
The AT&T4410 emulation provides compatibility with software designed to drive the
AT&T Dataspeed 4410 terminal. Refer to the AT&T 4410 Emulation section in the
Getting Started chapter for more information.
The BQ 3107 emulation provides compatibility with software designed to drive the
Bull BQ 3107 terminal. Refer to the BQ 3107 Emulation chapter for details.
The DG410 emulation enables you to run applications written for the Data General
D410 terminal. Refer to the DG410 Emulation chapter for information on keyboard
mapping.
8-30