Table of Contents
Advertisement
3
Specifying the settings for a speed dial number
This procedure cannot be used to register FTP server addresses. Register
FTP server addresses from PageScope Web Connection. (For details, refer
to "Specifying the setting for speed dialing (FTP server)" on page 3-57.)
The settings specified starting with step 9 are for Internet faxing. These set-
tings are applied if an Internet fax is sent according the procedure in "Using
internet faxing operations" on page 6-2. If a transmission is sent according
to the Scan to E-mail transmission procedure described in "Using scan to e-
mail operations" on page 4-2, the settings specified starting with step 9 are
not applied to the transmission method.
1
Press the [Utility] key.
2
Press the , key until
TRATION
3
Press the [2] key on the 10-key pad
to select
4
Use the 10-key pad to enter the 3-
digit speed dial number where you
wish to add an address. (Example:
011)
5
Enter the recipient name.
–
For information on entering text,
refer to "Entering text characters"
on page 2-11.
–
Up to 20 characters can be entered for the recipient name.
6
Press the [Yes] key.
7
Enter the e-mail address of the recip-
ient.
–
For information on entering text,
refer to "Entering text characters"
on page 2-11.
–
Up to 64 characters can be entered for the e-mail address.
3-42
FAX REGIS-
appears.
SPEED
DIAL.
Getting ready
SU-502
Advertisement
Table of Contents
