Rmm 3 Nic; Installing The Intel® Rmm3 And Intel® Rmm3 Nic; Figure 40. Installing The Intel ® Rmm3 And Intel ® Rmm3 Nic - Intel SR1690WB - Server System - 0 MB RAM Service Manual
A guide for technically qualified assemblers of intel identified subassemblies/ products
Hide thumbs
Also See for SR1690WB - Server System - 0 MB RAM:
Table of Contents
Advertisement
Installing and Removing the Intel
Management Module 3 and the Intel
Installing the Intel® RMM3 and Intel® RMM3 NIC
1. Squeeze the sides of the Intel
server system back panel and remove it (see letter "A")
2. Attach the bracket of Intel
3. Connect the Intel
4. Attach the Intel
50
Figure 40. Installing the Intel
®
®
RMM3 cable to the slot on server board (see letter "B").
®
RMM3 module to rear chassis by two screws (see letter "C").
®
Remote
®
RMM 3 NIC
®
RMM3 NIC module cover to disengage it from the
®
RMM3 and Intel
RMM3 NIC module by two screws (see letter "A").
®
Intel
Server System SR1690WB Service Guide
AF003315
®
RMM3 NIC
Advertisement
Table of Contents
Need help?
Do you have a question about the SR1690WB - Server System - 0 MB RAM and is the answer not in the manual?