Defining Report Parameters - Nortel CC MIS Getting Started Manual

CC MIS
CC MIS
Reports

Defining report parameters

You define the format, scope, output device, and manner of presenting in-
formation through the Report Parameter Definition screen. In this screen,
you are given the option to name the definition and use the name as the title
of the report.
The name of the report is used in menus to allow you to request the report
by name, rather than recreating the report parameter definition each time
you want to request the report.
Note: Ensure that the name you assign to a report is unique. CC MIS allows
you to save multiple report parameter definitions with the same name.
steps
Accessing Report Parameters screen
The Report Parameter Definition screen is shown in the figure below.
Report
parameter
definition
screen (NAP)
Page 9-4
1. From the CC MIS Main window, select Reports/
Parameters.
2. The Report Parameter Definition screen is
displayed.
Release 5.2
CC MIS Getting Started Guide (297-2671-175)