Console Port - NETGEAR GSM7212P User Manual

Console Port

To display the Console Port page, click Security
Use Serial Port Login Timeout (minutes) to specify how many minutes of inactivity
1.
should occur on a serial port connection before the switch closes the connection. Enter
a number between 0 and 160: the factory default is 5. Entering 0 disables the time-out.
Use Baud Rate (bps) to select the default baud rate for the serial port connection from the
2.
pull-down menu. You may choose from 1200, 2400, 4800, 9600, 19200, 38400, 57600, and
115200 baud. The factory default is 9600 baud.
Use Login Authentication List to specify which authentication list to use when you login
3.
through Telnet. The default value is defaultList.
Use Enable Authentication List to specify which authentication list you are using when
4.
going into the privileged EXEC mode. The default value is enableList.
Field
Character Size (bits)
Flow Control
Stop Bits
Parity
Web Management User Guide

Access > Console Port.
Description
The number of bits in a character. This is always 8.
Whether hardware flow control is enabled or
disabled. It is always disabled.
The number of stop bits per character. Its is always
1.
The parity method used on the serial port. It is
always None.
251