NETGEAR GSM7212P User Manual page 274

for Unicast Storm Recovery and the Unicast traffic on any Ethernet port exceeds the
configured threshold, the switch blocks (discards) the unicast traffic. The factory default is
disabled.
Storm Control Interface Configuration
To display the Storm Control Interface Configuration page, click Security

Storm Control Storm Control Interface Configuration.
Field
Broadcast Storm Recovery Mode
Broadcast Storm Recovery Level Type
Broadcast Storm Recovery Level
Multicast Storm Recovery Mode
Multicast Storm Recovery Level Type
Web Management User Guide
Description
Enable or disable this option by selecting the
corresponding line on the pull-down entry field.
When you specify Enable for Broadcast Storm
Recovery and the broadcast traffic on the specified
Ethernet port exceeds the configured threshold, the
switch blocks (discards) the broadcast traffic. The
factory default is disabled.
Specify the Broadcast Storm Recovery Level as a
percentage of link speed or as packages per second.
Specify the threshold at which storm control
activates. The factory default is 5 percent of port
speed for pps type.
Enable or disable this option by selecting the
corresponding line on the pull-down entry field.
When you specify Enable for Multicast Storm
Recovery and the multicast traffic on the specified
Ethernet port exceeds the configured threshold, the
switch blocks (discards) the multicast traffic. The
factory default is disabled.
Specify the Multicast Storm Recovery Level as a
percentage of link speed or as packages per second.
274

Traffic Control>