NETGEAR GSM7212P User Manual page 318

The following table describes the EAP statistics displayed on the screen.
Use the buttons at the bottom of the page to perform the following actions:
To clear all the EAP counters for all ports on the switch, select the check box in the
•
row heading and click CLEAR. The button resets all statistics for all ports to default
values.
To clear the counters for a specific port, select the check box associated with the port
•
and click CLEAR.
Click REFRESH to refresh the data on the screen and display the most current
•
statistics.
Field
Port
PAE Capabilities
EAPOL Frames Received
EAPOL Frames Transmitted
EAPOL Start Frames
Received
EAPOL Logoff Frames
Received
EAPOL Last Frame Version
Web Management User Guide
Description
Selects the port to be displayed. When the selection is changed, a screen
refresh will occur causing all fields to be updated for the newly selected port.
All physical interfaces are valid.
This displays the PAE capabilities of the selected port
This displays the number of valid EAPOL frames of any type that have been
received by this authenticator.
This displays the number of EAPOL frames of any type that have been
transmitted by this authenticator.
This displays the number of EAPOL start frames that have been received by
this authenticator.
This displays the number of EAPOL logoff frames that have been received
by this authenticator.
This displays the protocol version number carried in the most recently
received EAPOL frame.
318