File Management; Copy - NETGEAR GSM7212P User Manual

Click CANCEL to cancel the configuration on the screen and reset the data on the screen to
3.
the latest value of the switch.
Click APPLY to send the updated configuration to the switch. Configuration changes take effect
immediately.

File Management

The system maintains two versions of the ProSafe® Managed Switches software in
permanent storage. One image is the active image, and the second image is the backup
image. The active image is loaded during subsequent switch restarts. This feature reduces
switch down time when upgrading or downgrading the ProSafe® Managed Switches
software.
The File Management menu contains links to the following options:
on page 347
•

Copy

• Dual Image Configuration
Copy
To display the Copy page, click Maintenance
Use Source Image to select the image1 or image2 as source image when copy occurs.
1.
Use Stack member to select the destination unit to which you are going to copy from
2.
master.
Use Destination Image to select the image1 or image2 as destination image when copy
3.
occurs.
Web Management User Guide
on page 348

File Management
347

Copy.