NETGEAR GSM7212P User Manual page 114

Use BPDU Filter to specify whether the BPDU Filter feature is enabled. STP BPDU filtering
7.
applies to all operational edge ports. Edge Port in an operational state is supposed to be
connected to hosts that typically drop BPDUs. If an operational edge port receives a BPDU,
it immediately loses its operational status. In that case, if BPDU filtering is enabled on this
port then it drops the BPDUs received on this port.
Field
Configuration digest key
MST ID
VID ID
FID ID
Web Management User Guide
Description
Identifier used to identify the configuration currently
being used.
Table consisting of the MST instances (including the
CST) and the corresponding VLAN IDs associated
with each of them.
Table consisting of the VLAN IDs and the
corresponding FID associated with each of them.
Table consisting of the FIDs and the corresponding
VLAN IDs associated with each of them.
114