Network Interface - NETGEAR GSM7212P User Manual

Use Current Network Configuration Protocol to configure the IPv6 address for the IPv6
3.
network interface by DHCPv6 protocol if this option is enabled. The default value is None.
DHCPv6 can be enabled only when IPv6 Auto config or DHCPv6 are not enabled on any of
the management interfaces.
Use DHCPv6 Client DUID to specify an Identifier used to identify the client's unique DUID
4.
value. This option only displays when DHCPv6 is enabled.
Use IPv6 Gateway to specify the gateway for the IPv6 network interface. The gateway
5.
address is in IPv6 global or link-local address format.
Use IPv6 Prefix/Prefix Length to add the IPv6 prefix and prefix length to the IPv6 network
6.
interface. The address is in global address format.
Use EUI64 to specify whether to format the IPv6 address in EUI-64 format. Default value is
7.
false.
Click ADD to add a new IPv6 address in global format.
8.
Click DELETE to delete a selected IPv6 address.
9.
IPv6 Network Interface Neighbor Table
Use this page to display IPv6 Network Port Neighbor entries.
To display the IPv6 Network Neighbor page, click System > Management > Network
Interface > IPv6 Network Interface Neighbor Table. A screen similar to the following
displays.
The following table displays IPv6 Network Interface Neighbor Table information.
Field
IPv6 address
MAC address
IsRtr
Web Management User Guide
Description
The Ipv6 Address of a neighbor switch visible to the

network interface.

The MAC address of a neighbor switch.
True(1) if the neighbor machine is a router, false(2)
otherwise.
30