Ssh; Ssh Configuration - NETGEAR GSM7212P User Manual

Use Transfer Mode to specify the protocol to use to transfer the file:
2.
TFTP - Trivial File Transfer Protocol
•
SFTP - Secure File Transfer Program
•
SCP - Secure Copy
•
Use Server Address Type to specify either IPv4 or IPv6 to indicate the format of the
3.
TFTP/SFTP/SCP Server Address field. The factory default is IPv4.
Use Server Address to enter the IP address of the server in accordance with the format
4.
indicated by the Server Address Type. The factory default is the IPv4 address 0.0.0.0.
Use Remote File Name to enter the name on the TFTP server of the file you want to
5.
download. You may enter up to 32 characters. The factory default is blank.

SSH

From the SSH link, you can access the following pages:
•

SSH Configuration

• Host Keys Management
• Host Keys Download
SSH Configuration
To display the SSH Configuration page, click Security
Use SSH Admin Mode to Enable or Disable the administrative mode of SSH. The
1.
currently configured value is shown when the web page is displayed. The default value
is Disable.
Use SSH Version 1 to Enable or Disable Protocol Level 1 for SSH. The currently configured
2.
value is shown when the web page is displayed. The default value is Enable.
Web Management User Guide
on page 246
on page 247
on page 248
246
 
Access > SSH SSH Configuration.